Invited Book Chapters
B1.	Dong Sung Kim and Kwang W. Oh, “Cyclic Olefin Copolymer (COC) Polymer Moulding for LOC”, Chapter 10 in Lab on a Chip Technology, Volume 1: Fabrication and Microfluidics by K.E. Herold and A. Rasooly (Ed.), Caister Academic Press, UK, 2009 (ISBN: 978-1-904455-46-2), pp. 139-160.
International Journals (30 published, 2 accepted, 4 submitted)
IJ1.	Dong Sung Kim, Kwang-Cheol Lee, Tai Hun Kwon and Seung S. Lee, “Micro-channel Filling Flow Considering Surface Tension Effect”, Journal of Micromechanics and Microengineering, Vol. 12, pp. 236-246, 2002 (March 28, 2002; SCI IF = 2.321 (2006)).
IJ2.	Dong Sung Kim, Sang Sik Yang, Sung-Keun Lee, Tai Hun Kwon and Seung S. Lee, “Physical Modeling and Analysis of Microlens Formation Fabricated by a Modified LIGA Process”, Journal of Micromechanics and Microengineering, Vol. 13, pp. 523-531, 2003 (May 14, 2003; SCI IF = 2.321 (2006)).
IJ3.	Dong Sung Kim, Seok Woo Lee, Tai Hun Kwon and Seung S. Lee, “A Barrier Embedded Chaotic Micromixer”, Journal of Micromechanics and Microengineering, Vol. 14, pp. 798-805, 2004 (April 19, 2004; SCI IF = 2.321 (2006)). * This paper was introduced in the textbook written by V. Hessel, H. Lowe, A. Muller and G. Kolb (Chemical Micro Process Engineering: Processing, Applications and Plants, Wiley, 2005, pp. 219-226)
IJ4.	Dong Sung Kim, In Hwan Lee, Tai Hun Kwon and Dong-Woo Cho, “A Barrier Embedded Kenics Micromixer”, Journal of Micromechanics and Microengineering, Vol. 14, pp. 1294-1301, 2004 (July 13, 2004; SCI IF = 2.321 (2006)). * This paper was introduced in the textbook written by V. Hessel, H. Lowe, A. Muller and G. Kolb (Chemical Micro Process Engineering: Processing, Applications and Plants, Wiley, 2005, pp. 219-226)
IJ5.	Bong-Kee Lee, Dong Sung Kim and Tai Hun Kwon, “Replication of Microlens Arrays by Injection Molding”, Microsystem Technologies, Vol. 10, pp. 531-535, 2004 (October 1, 2004; SCI IF = 0.673 (2006)).
IJ6.	Dong Sung Kim, Se Hwan Lee, Tai Hun Kwon and Chong H. Ahn, “A Serpentine Laminating Micromixer Combining Splitting/Recombination and Advection”, Lab on a Chip, Vol. 5, pp. 739-747, 2005 (April 26, 2005; SCI IF = 5.821 (2006)).
IJ7.	Dong Sung Kim and Tai Hun Kwon, “Modeling, Analysis and Design of Centrifugal Force-Driven Transient Filling Flow into a Circular Microchannel”, Microfluidics and Nanofluidics, Vol. 2, pp. 125-140, 2006 (March 2006) (SCI IF = 2.615 (2006)).
IJ8.	Dong Sung Kim, Hyun Sup Lee, Bong-Kee Lee, Sang Sik Yang, Tai Hun Kwon and Seung S. Lee, “Replications and Analysis of Microlens Array Fabricated by a Modified LIGA Process”, Polymer Engineering and Science, Vol. 46, pp. 416-425, 2006 (April 2006) (SCI IF = 1.414 (2006)).
IJ9.	Seok Woo Lee, Dong Sung Kim, Seung S. Lee and Tai Hun Kwon, “A Split and Recombination Micromixer Fabricated in a PDMS Three-Dimensional Structure”, Journal of Micromechanics and Microengineering, Vol. 16, pp. 1067-1072, 2006 (May 2006) (SCI IF = 2.321 (2006)).
IJ10.	Dong Sung Kim, Se Hwan Lee, Chong H. Ahn, Jae Y. Lee and Tai Hun Kwon, “Disposable Integrated Microfluidic Biochip for Blood Typing by Plastic Microinjection Moulding”, Lab on a Chip, Vol. 6, pp. 794-802, 2006 (June 2006) (SCI IF = 5.821 (2006)). * This paper was highlighted and introduced in Magazine; Chemical Technology (May 23, 2006; Vol. 3 Issue 6, pp. T23, 2006) published by Royal Society of Chemistry and the paper is now freely accessed in the website of Lab on a Chip.
IJ11.	Dong Sung Kim and Tai Hun Kwon, “Modeling, Analysis and Design of Centrifugal Force Driven Transient Filling Flow into Rectangular Microchannel”, Microsystem Technologies, Vol. 12, pp. 822-838, 2006 (August 2006) (SCI IF = 0.673 (2006)).
IJ12.	Seung Mo Lee, Hyun Sup Lee, Dong Sung Kim and Tai Hun Kwon, “Fabrication of Hydrophobic Films Replicated from Plant Leaves in Nature”, Surface & Coatings Technology, Vol. 201, pp. 553-559, 2006 (October 2006) (SCI IF = 1.559 (2006)).
IJ13.	Dong Sung Kim, Hyun Sup Lee, Junghyun Lee, Sungjoo Kim, Kun-Hong Lee, Wonkyu Moon and Tai Hun Kwon, “Replication of High-Aspect-Ratio Nanopillar Array for Biomimetic Gecko Foot-Hair Prototype by UV Nano Embossing with Anodic Aluminum Oxide Mold”, Microsystem Technologies, Vol. 13, pp. 601-606, 2007 (March 2007) (SCI IF = 0.673 (2006)).
IJ14.	Hyun Sup Lee, Dong Sung Kim and Tai Hun Kwon, “UV Nano Embossing for Polymer Nano Structures with Non-Transparent Mold Insert”, Microsystem Technologies, Vol. 13, pp. 593-599, 2007 (March 2007) (SCI IF = 0.673 (2006)).
IJ15.	Dong Sung Kim, Han Ul Lee, Nam Hyo Kim, Kun-Hong Lee, Dong-Woo Cho and Tai Hun Kwon, “Fabrication of Microchannel Containing Nanopillar Arrays using Micromachined AAO (Anodic Aluminum Oxide) Mold”, Microelectronic Engineering, Vol. 84, pp. 1532-1535, 2007 (May ~ August 2007) (SCI IF = 1.398 (2006)).
IJ16.	Dong Sung Kim, Hyun Sup Lee, Jungyoup Han, Se Hwan Lee, Chong H. Ahn and Tai Hun Kwon, “Collapse-Free Thermal Bonding Technique for Large Area Microchambers in Plastic Lab-on-a-Chip Applications”, Microsystem Technologies, Vol. 14, pp. 179-184, 2008 (February 2008) (SCI IF = 0.673 (2006)).
IJ17.	Bong-Kee Lee, Chul Jin Hwang, Dong Sung Kim and Tai Hun Kwon, “Replication Quality of Flow-through Microfilters in Microfluidic Lab-on-a-Chip for Blood Typing by Microinjection Molding”, Journal of Manufacturing Science and Engineering ? Transactions of the ASME, Vol. 130, 021010(1-8), 2008 (April 2008) (SCI IF = 0.536 (2006)).
IJ18.	Jang Min Park, Dong Sung Kim, Tae Gon Kang and Tai Hun Kwon, “Improved Serpentine Laminating Micromixer with Enhanced Local Advection”, Microfluidics and Nanofluidics, Vol. 4, pp. 513-523, 2008 (June 2008) (SCI IF = 2.615 (2006)).
IJ19.	Dong Sung Kim, Jong Sun Kim, Young Bae Ko, Jong Deok Kim, Kyung Hwan Yoon and Chul Jin Hwang, “Experimental Characterization of Transcription Properties of Microchannel Geometry Fabricated by Injection Molding Based on Taguchi Method”, Microsystem Technologies, Vol. 14, pp. 1581-1588, 2008 (October 2008).
IJ20.	Sung Hwan Choi, Dong Sung Kim and Tai Hun Kwon, “Microinjection Molded Disposable Microfluidic Lab-on-a-Chip for Efficient Detection of Agglutination”, Microsystem Technologies, Vol. 15, pp. 309-316, 2009 (February 2009).
IJ21.	Dong Sung Kim, Dong Sung (Danny) Kim, Kyungsup Han and Wonseok Yang, “An Efficient 3-Dimensional Hydrodynamic Focusing Microfluidic Device by means of Locally Increased Aspect Ratio”, Microelectronic Engineering, Vol. 86, pp. 1343-1346, 2009 (April/June 2009).
IJ22.	Dong Sung Kim, Bong-Kee Lee, Jihoon Yeo, Min Jin Choi, Wonseok Yang and Tai Hun Kwon, “Fabrication of PDMS Micro/Nano Hybrid Surface for Increasing Hydrophobicity”, Microelectronic Engineering, Vol. 86, pp. 1375-1378, 2009 (April/June 2009).
IJ23.	Seung-Jae Lee, In Hwan Lee, Jeong Hun Park, So-Jung Gwak, Jong-Won Rhie, Dong-Woo Cho, Tae Jo Ko and Dong Sung Kim, “Development of a Hybrid Scaffold and a Bioreactor for Cartilage Regeneration”, Chinese Science Bulletin, Vol. 54, pp. 3608-3612, 2009 (October 2009).
IJ24.	Jihoon Yeo, Min Jin Choi and Dong Sung Kim, “Robust Hydrophobic Surfaces with Various Micropillar Arrays”, Journal of Micromechanics and Microengineering, Vol. 20, 025028 (8pp), 2010 (February 2010).
IJ25.	Seung Ho Paek, Young Ki Choi and Dong Sung Kim, “Selective Microfabrication of Silver Electrodes inside a Microchannel by Multiphase Laminar Flow with Density Difference”, Microelectronic Engineering, Vol. 87, pp. 1375-1378, 2010 (May 2010).
IJ26.	Wonseok Yang, Young Gyu Nam, Bong-Kee Lee, Kyungsup Han, Tai Hun Kwon and Dong Sung Kim, “Fabrication of a Hydrophilic Poly(dimethylsiloxane) Microporous Structure and Its Application to Portable Microfluidic Pump”, Japanese Journal of Applied Physics, Vol. 49, 06GM01, 2010 (June 2010). * The figure of this paper was selected as a cover image of this issue.
IJ27.	Jihoon Yeo, Jejun Ryu, Bong-Kee Lee, Euihyeon Byeon, Tai Hun Kwon and Dong Sung Kim, “Theoretical and Experimental Characterization of Wettability of Various Nanolens Arrayed Polymer Surfaces Replicated with Nanodimpled Aluminum Mold Insert”, Microsystem Technologies, Vol. 16, pp. 1425-1430, 2010 (August 2010).
IJ28.	Jihoon Yeo and Dong Sung Kim, “The Effect of the Aspect Ratio on the Hydrophobicity of Microstructured Polydimethylsiloxane (PDMS) Robust Surfaces”, Microsystem Technologies, Vol. 16, pp. 1457-1463, 2010 (August 2010).
IJ29.	Jong Sun Kim, Dong Sung Kim, Jeong Jin Kang, Jong Deok Kim and Chul Jin Hwang, “Replication and Comparison of Concave and Convex Microlens Arrays of Light Guide Plate for Liquid Crystal Display in Injection Molding”, Polymer Engineering and Science, Vol. 50, pp. 1696-1704, 2010 (August 2010).
IJ30.	Bong-Kee Lee, Jong Hyun Kim, Dong Sung Kim, Suk Sang Chang and Tai Hun Kwon, “Microfabrication of a Nickel Mold Insert by a Modified Deep X-ray Lithography Process and Its Application to Hot Embossing”, Microelectronic Engineering, Vol. 87, pp. 2449-2455, 2010 (December 2010).
IJ31.	Bong-Kee Lee, Jang Min Park, Dong Sung Kim and Tai Hun Kwon, “A Simple Fabrication Technique of Microlens Applicable to Integrated Lab-on-a-Chip by Overflow of UV Resin through Holes”, Current Applied Physics, Accepted for publication.
IJ32.	Kyung Je Cha, Bong-Kee Lee and Dong Sung Kim, “Fabrication of Polymer Micro-Pyramid/Nano-Lens Combined Structures Using Microstructured Nanodimpled Aluminum Stamp”, Japanese Journal of Applied Physics, Accepted for publication.
IJ33.	Kyung Je Cha, Bong-Kee Lee and Dong Sung Kim, “Nanofabrication of Nickel Stamp for Replication of Polymer Multi-level Nanolens Arrays via Modified Two-step Anodization Process”, Japanese Journal of Applied Physics, Minor revision.
IJ34.	Kyung Je Cha, Kwang-Sook Park, Sun-Woong Kang, Byung-Hyun Cha, Bong-Kee Lee, In-Bo Han, Dong-Ah Shin, Dong Sung Kim and Soo Hong Lee, “Adipose-derived Stromal Cell Behaviors on Replicated Polymeric Substrate with Lotus Leaf Surface Structure”, Lab on a Chip, submitted.
IJ35.	Kyungsup Han, Sona Lee, Kyoung Duck Seo, Sung-Up Choi, Jonghwi Lee, Jaehwi Lee, Byung Kook Kwak, Hae-Jin Choi and Dong Sung Kim, “A Parametric Study of Generation of Monodisperse Clay-PNIPAam Embolic Microspheres Using Hydrodynamic Focusing Microfluidic Device”, Japanese Journal of Applied Physics, submitted.
IJ36.	Kyoung Je Cha and Dong Sung Kim, “A Portable Pressure Pump for Microfluidic Lab-on-a-Chip Systems using a Porous Polydimethylsiloxane (PDMS) Sponge”, Biomedical Microdevices, submitted.
International Conference Proceedings
IC1.	Dong Sung Kim, Min Seok Yi, Tai Hun Kwon and Seung S. Lee, “Experimental and Numerical Studies of Micro-channel Filling Flow”, 2nd Korea-Japan Joint Symposium on Micro-Fabrication, Feb. 20, 2001, Seoul, Korea, pp. 81-85.
IC2.	Dong Sung Kim, Kwang-Cheol Lee, Tai Hun Kwon and Seung S. Lee, “Transient Filling Flow into Microchannels Considering Surface Tension”, The fifth international conference on MSM (Modeling and Simulation of Microsystems) 2002, April 21-25, 2002, Puerto Rico, USA, pp. 108-111.
IC3.	Dong Sung Kim, Sung-Keun Lee, Sang Sik Yang, Tai Hun Kwon and Seung S. Lee, “Prediction Model of Microlens Fabricated by Modified LIGA Process”, The fifth international conference on MSM (Modeling and Simulation of Microsystems) 2002, April 21-25, 2002, Puerto Rico, USA, pp. 254-257.
IC4.	Sung-Keun Lee, Dong Sung Kim, Sang Sik Yang, Seung S. Lee and Tai Hun Kwon, “Microlens Fabrication by the Modified LIGA Process and Its Modeling and Analysis”, 2002 IEEE/LEOS International Conference on Optical MEMS, August 20-23, 2002, Lugano, Switzerland, pp. 77-78.
IC5.	Dong Sung Kim, Seok Woo Lee, Tai Hun Kwon and Seung S. Lee, “Barrier Embedded Chaotic Micromixer”, The Sixth International Conference on Micro Total Analysis Systems (?TAS) 2002, November 3-7, 2002, Nara, Japan, pp. 757-759. ?TAS2002 WIDMER (GRAND) POSTER AWARD
IC6.	Dong Sung Kim, Seok Woo Lee, Tai Hun Kwon and Seung S. Lee, “Barrier Embedded Chaotic Micromixer”, IEEE The Sixteenth Annual International Conference on MEMS, MEMS2003, January 19-23, 2003, Kyoto, Japan, pp. 339-342.
IC7.	Hyun Sup Lee, Dong Sung Kim and Tai Hun Kwon, “A Novel Low Temperature Bonding Technique for Plastic Substrates Using X-ray Irradiation”, The 12th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers’03, June 8-12, 2003, Boston, USA, pp. 1331-1334.
IC8.	Bong-Kee Lee, Dong Sung Kim and Tai Hun Kwon, “Replication of Microlens Arrays by Injection Molding”, HARMST (High Aspect Ratio Micro-Structure Technology) 2003, June 15-17, 2003, Monterey, California, USA, pp. 115-116.
IC9.	Dong Sung Kim, Hyun Sup Lee, Sang Sik Yang, Bong-Kee Lee, Sung-Keun Lee, Tai Hun Kwon and Seung S. Lee, “Fabrication and Modeling of Microlens Array by a Modified LIGA Process”, The fourth Korea-Japan Plastics Processing Joint Seminar, April 25, 2003, Seoul, Korea, pp. 7-13.
IC10.	Dong Sung Kim, In Hwan Lee, Tai Hun Kwon and Dong-Woo Cho, “A Novel Chaotic Micromixer: Barrier Embedded Kenics Micromixer”, MicroTAS2003, October 5-9, 2003, Squaw Valley, California, USA, pp. 73-76.
IC11.	Dong Sung Kim, Tae Gon Kang, Seok Woo Lee and Tai Hun Kwon, “Experimental and Numerical Characterizations of Barrier Embedded Micromixer”, MicroTAS2003, October 5-9, 2003, Squaw Valley, California, USA, pp. 121-124.
IC12.	In Hwan Lee, Dong Sung Kim, Dong-Woo Cho and Tai Hun Kwon, “Micro-injection Molding and Micro-stereolithography Technology”, Proc. Korea-Japan Joint Symposium on Nanoengineering 2003 (NANO 2003), November 27-28, 2003 KAIST, Daejeon, Korea, pp. 100-106.
IC13.	Dong Sung Kim, Se Hwan Lee, Tai Hun Kwon and Chong H. Ahn, “Development of a Novel Chaotic Micromixer: Serpentine Laminating Micromixer,” PPS (Polymer Processing Society) Asia/Australia Meeting 2004, August 29-September 1, 2004, Gyeongju, Korea, pp. 86.
IC14.	Dong Sung Kim and Tai Hun Kwon, “Modeling, Analysis and Design of Centrifugal Force Driven Transient Filling Flow into Circular Microchannel”, MicroTAS2004, September 26-30, 2004, Malmo, Sweden, Vol. 1, pp.174-176.
IC15.	Se Hwan Lee, Jungyoup Han, Dong Sung Kim, Tai Hun Kwon, Chul Jin Hwang, Young Moo Heo and Chong H. Ahn, “A High Precision Self-Assembly Technique for Multilayer Polymer Lab-on-a-Chips”, MicroTAS2004, September 26-30, 2004, Malmo, Sweden, Vol. 2, pp.413-415.
IC16.	Dong Sung Kim and Tai Hun Kwon, “Modeling, Analysis and Design of Centrifugal Force Driven Transient Filling Flow into Rectangular Microchannel”, NSTI-Nanotech 2005, May 8-12, 2005, Anaheim, CA, USA, Vol. 1, pp. 704-707.
IC17.	Seok Woo Lee, Dong Sung Kim, Seung S. Lee and Tai Hun Kwon, “Split and Recombination Micromixer based on PDMS Three-Dimensional Micro Structure”, Transducers`05, June 5-9, 2005, COEX, Seoul, Korea, Vol. 2, pp. 1533-1536.
IC18.	Dong Sung Kim, Hyun Sup Lee, Junghyun Lee, Kun-Hong Lee and Tai Hun Kwon, “Simple Large Area High-Aspect-Ratio Nanostructure Replication of Biomimetic Gecko Foot-Hair Prototype by UV Nano Embossing with AAO (Anodic Aluminum Oxide) Mold”, HARMST2005, June 10-13, 2005, Gyeongju, Korea, pp. 258-259.
IC19.	Hyun Sup Lee, Dong Sung Kim and Tai Hun Kwon, “UV Nano Embossing Process for Replication of Polymer Nanostructures with UV Non-Transparent Mold Inserts”, HARMST2005, June 10-13, 2005, Gyeongju, Korea, pp. 232-233.
IC20.	Bong-Kee Lee, Jong Hyun Kim, Dong Sung Kim, Jang Min Park, Suk Sang Chang and Tai Hun Kwon, “A New Fabrication Process of High-Aspect-Ratio Nickel Mold Insert by a Modified LIGA Process”, HARMST2005, June 10-13, 2005, Gyeongju, Korea, pp. 140-141.
IC21.	Dong Sung Kim, Hyun Sup Lee, Tai Hun Kwon and Chong H. Ahn, “A Collapse-Free Thermal Bonding Technique for Plastic Microfluidic Systems with Large Area Microchamber”, MicroTAS2005, October 9-13, 2005, Boston, USA, pp. 684-686.
IC22.	Dong Sung Kim, Se Hwan Lee, Chong H. Ahn, Jae Y. Lee and Tai Hun Kwon, “A Disposable Integrated Lab-on-a-Chip Prototype of Blood Typing Microfluidic Biochip Fabricated by Injection Molding”, MicroTAS2005, October 9-13, 2005, Boston, USA, pp. 1306-1308.
IC23.	Dong Sung Kim and Tai Hun Kwon, “Magnetohydrodynamic (MHD) Complex Flow Generation in Microchannel”, Nanotech2006, May 7-11, Boston, USA, Vol. 2, pp. 524-527 (oral).
IC24.	Dong Sung Kim, Se Hwan Lee, Chong H. Ahn, Jae Y. Lee and Tai Hun Kwon, “Disposable Microfluidic Lab-on-a-Chip for Blood Typing Fabricated by Microinjection Molding and Collapse-Free Thermal Bonding”, The Korea-Japan Plastics Processing Joint Seminar 2006, September 8, 2006, Seoul, Korea, pp. 1-5 (oral).
IC25.	Dong Sung Kim, Han Ul Lee, Nam Hyo Kim, Kun-Hong Lee, Dong-Woo Cho and Tai Hun Kwon, “Fabrication of Microchannel with Nanopillar Array using Micromachined AAO”, Micro- and Nano- Engineering (MNE) 2006, September 17-20, 2006, Barcelona, Spain, pp. 677-678.
IC26.	Yeh-Chan Ahn, Woonggyu Jung, Dong Sung Kim, Seung-Jae Lee, Dong-Woo Cho, Tae Gon Kang, Tai Hun Kwon, Zhongping Chen, “Visualization of Turbid Two-Fluid Flows inside Microfluidic Conduits”, Proceedings of SPIE (SPIE Photonics West), January 20-25, 2007, Vol. 6465, pp. 64650V-1-64650V-8.
IC27.	Seung-Jae Lee, Byung Kim, Geunbae Lim, Jong-Won Rhie, Dong Sung Kim and Dong-Woo Cho, “Development of Three-Dimensional Hybrid Scaffold Using Chondrocytes Encapsulated Alginate Hydrogel”, Society for Biomaterials 2007 Annual Meeting, April 18-21, 2007, Chicago IL, USA, Abstract number 861.
IC28.	Dong Sung Kim, Jong Sun Kim, Young Bae Ko, In Ki Min, Jae Won Yu, Jong Deok Kim, Kyung Hwan Yoon and Chul Jin Hwang, “Experimental Characterization of Transcription Properties of Microchannel Geometry Fabricated by Injection Molding Based on Taguchi Method”, HARMST2007, June 7-9, 2007, Besancon, France, pp. 159-160.
IC29.	Bong-Kee Lee, Jae Won Yu, Chul Jin Hwang, Dong Sung Kim and Tai Hun Kwon, “Replication of Flow-Through Microfilters for Agglutinated Red Blood Cells by Microinjection Molding”, HARMST2007, June 7-9, 2007, Besancon, France, pp. 161-162.
IC30.	H.S. Sim, S.H. Lee, D.S. Kim and H.S. Ryou, “Femtosecond Pulse Laser Interactions with Thin Silicon Films and Crater Formation Considering Optical Phonons and Wave Interface”, HARMST2007, June 7-9, 2007, Besancon, France, pp. 195-196.
IC31.	Jang Min Park, Dong Sung Kim, Tae Gon Kang and Tai Hun Kwon, “Improved Serpentine Laminating Micromixer: Numerical Investigation and Experimental Verification”, The Fifth International Conference on Nanochannel, Microchannel and Minichannel (ICNMM2007), June 18-20, 2007, Universidad De Las Americas Puebla, Mexico, pp. ICNMM2007-30204-1~6 (302041-302046).
IC32.	Kyoung Je Cha, Dong Sung Kim and Tai Hun Kwon, “Development of Portable Porous PDMS Pump for Microfluidic Lab-on-a-Chip”, MicroTAS2007, October 7-11, 2007, Paris, France, pp. 907-909.
IC33.	Jong Sun Kim, Young-Bae Ko, In Ki Min, Seung-Ho Paek, Jong Deok Kim, Kyung Hwan Yoon, Dong Sung Kim and Chul Jin Hwang, “Transcription of Negative and Positive Microlens Arrays of Light Guide Plate in Injection Molding”, The Polymer Processing Society 24th Annual Meeting PPS-24, June 15-19, 2008, Salerno, Italy, pp. 62 (S03-972).
IC34.	Seung-Ho Paek, Jong Sun Kim, Chul Jin Hwang, Young Ki Choi and Dong Sung Kim, “Microfabrication of Dual Opposite Silver Electrodes inside a Microchannel by means of Multiphase Laminar Flow with Density Difference”, MicroTAS2008, October 12-16, 2008, San Diego, CA, USA, pp. 354-356.
IC35.	Won Seok Yang, Jun-Oh Ryu and Dong Sung Kim, “A Vertical Laminating Micromixer (VLM)”, MicroTAS2008, October 12-16, 2008, San Diego, CA, USA, pp. 71-73.
IC36.	Dong Sung (Danny) Kim, Won Seok Yang and Dong Sung Kim, “An Efficient 3-Dimensional Hydrodynamic Focusing Microfluidic Device by means of Locally Increased Aspect Ratio”, Micro and Nano Engineering 2008, September 15-18, 2008, Athens, Greece, pp. 545.
IC37.	Dong Sung Kim, Bong-Kee Lee, Won Seok Yang, Dong-Hwan Shin, Kyoung Je Cha, Seong Hyuk Lee and Tai Hun Kwon, “Fabrication of PDMS Micro/Nano Hybrid Surface for Increasing Hydrophobicity”, Micro and Nano Engineering 2008, September 15-18, 2008, Athens, Greece, pp. 174.
IC38.	Dong Hwan Shin, Seong Hyuk Lee, Dong Sung Kim, Su Yeon Jin and Jung Yul Yoo, “Evaporation Characteristics of Sessile Droplets on Hydrophobic and Hydrophilic Surfaces”, Micro and Nano Engineering (MNE) 2008, September 15-18, 2008, Athens, Greece, pp. 546.
IC39.	Jihoon Yeo, Bong-Kee Lee, Min Jin Choi, Wonseok Yang, Tai Hun Kwon and Dong Sung Kim, “Theoretical and Experimental Investigation of Hydrophobicity of PDMS Micro/Nano Hybrid Surface”, International Symposium on Nature-Inspired Technology (ISNIT) 2009, June 17-19, 2009, Jeju, South Korea, pp. 51 (ISNIT-27).
IC40.	Jihoon Yeo, Bong-Kee Lee, Jejun Ryu, Tai Hun Kwon and Dong Sung Kim, “Theoretical and Experimental Characterization of Hydrophobicity of Various Polymer Surfaces with Nanolens Array”, International Symposium on Nature-Inspired Technology (ISNIT) 2009, June 17-19, 2009, Jeju, South Korea, pp. 62 (ISNIT-39).
IC41.	Bong-Kee Lee, Jang Min Park, Dong Sung Kim and Tai Hun Kwon, “A Simple Fabrication Technique of Microlens Applicable to Integrated Lab-on-a-Chip by Overflow of UV Resin through Holes”, International Symposium on Nature-Inspired Technology (ISNIT) 2009, June 17-19, 2009, Jeju, South Korea, pp. 49 (ISNIT-25).
IC42.	Jihoon Yeo, Min Jin Choi and Dong Sung Kim, “Effect of Aspect Ratio on Hydrophobicity of Microstructured PDMS Surfaces”, 8th International Workshop on High Aspect Ratio Micro Structure Technology (HARMST) 2009, June 25-28, 2009, Saskatoon, Canada, pp. 137-138.
IC43.	Jihoon Yeo, Bong-Kee Lee, Jejun Ryu, Tai Hun Kwon and Dong Sung Kim, “Theoretical and Experimental Characterization of Hydrophobicity of Various Nanolens Arrayed Polymer Surfaces Replicated with Nanodimpled Aluminum Mold Insert”, 8th International Workshop on High Aspect Ratio Micro Structure Technology (HARMST) 2009, June 25-28, 2009, Saskatoon, Canada, pp. 75-76.
IC44.	Wonseok Yang, Young Gyu Nam, Kyungsup Han, Kyung Je Cha, Tai Hun Kwon and Dong Sung Kim, “Fabrication of Hydrophilic/Hydrophobic Hybrid Microporous Structure and Its Application to Microfluidic Device”, Micro and Nano Engineering (MNE) 2009, September 28 ? October 1, 2009, Ghent, Belgium, P-LIFE-24.
IC45.	Seung-Ho Paek, Young Ki Choi and Dong Sung Kim, “Selective Microfabrication of Silver Electrodes inside a Microchannel by Multiphase Laminar Flow with Density Difference”, Micro and Nano Engineering (MNE) 2009, September 28 ? October 1, 2009, Ghent, Belgium, P-NANO-105.
IC46.	Wonseok Yang, Young Gyu Nam, Kyungsup Han, Kyung Je Cha, Tai Hun Kwon and Dong Sung Kim, “Hydrophilic/Hydrophobic Hybrid Microporous Structure for Portable Pump for Microfluidic Device”, MicroTAS2009, November 1-5, 2009, Jeju, Korea, pp. 363-365.
IC47.	Wonseok Yang, Young Gyu Nam, Bong-Kee Lee, Tai Hun Kwon and Dong Sung Kim, “Fabrication of Hydrophilic PDMS containing Silwet L-77 Microporous Structure and Its Application to Portable Microfluidic Pump”, 22nd International Microprocesses and Nanotechnology Conference (MNC) 2009, November 16-19, 2009, Sapporo, Japan, pp. 42-43 (Oral presentation).
IC48.	Kyoung Je Cha, Kwang-Sook Park, Dong Sung Kim, Soo-Hong Lee and Tai Hun Kwon, “Adipose-derived Stromal Cell Behaviors on Replicated Polymeric Lotus Leaf Structures”, Society for Biomaterials 2010 Annual Meeting & Exposition, April 21-24, 2010, Seattle, Washington, USA, Stem Cell-Biomaterial Interactions 806.
IC49.	Jihoon Yeo, Jejun Ryu, Bong-Kee Lee, Euihyeon Byeon, Tai Hun Kwon and Dong Sung Kim, “Theoretical and experimental characterization of wettability of various nanolens arrayed polymer surfaces replicated with nanodimpled aluminum mold insert”, IEEE NANO 2010 Joint Symposium with NANO KOREA 2010, August 17-20, 2010, KINTEX, Korea, NKP_TS04_063.
IC50.	Euihyeon Byeon, Jihoon Yeo, Seokmin Kim and Dong Sung Kim, “Nanoreplication of Anti-reflective Polymer Layer Using Anodic Aluminum Oxide (AAO) Mold”, IEEE NANO 2010 Joint Symposium with NANO KOREA 2010, August 17-20, 2010, KINTEX, Korea, NKP_TS02_008.
IC51.	Se-Hwan Lee, Ki Myung Song, Su A Park, Su Hee Lee, Seung-Jae Lee, Dong Sung Kim and Young-Sam Cho, “PCL/Hydrogel Scaffold Fabrication Using Wire-Network Molding (WNM) Technique”, 2010 International Conference on Biofabrication, October 4-6, 2010, Philadelphia, Pennsylvania, USA, pp. 115 (Oral A185).
IC52.	Kyungsup Han, Sona Lee, Myung Joo Kang, Jonghwi Lee, Jaehwi Lee, Byung Kook Kwak and Dong Sung Kim, “A Parametric Study of Generation of Monodisperse Clay-PNIPAam Embolic Microspheres using Hydrodynamic Focusing Microfluidic Device”, 23rd International Microprocesses and Nanotechnology Conference (MNC) 2010, November 9-12, 2010, Fukuoka, Japan, 12D-11-113.
IC53.	Kyoung Je Cha, Bong-Kee Lee, Tai Hun Kwon and Dong Sung Kim, “Fabrication of Polymer Micro-Pyramid/Nano-Lens Combined Structures using Microstructured Nanodimpled Aluminum Stamp”, 23rd International Microprocesses and Nanotechnology Conference (MNC) 2010, November 9-12, 2010, Fukuoka, Japan, 12D-11-52.
IC54.	Kyoung Je Cha, Bong-Kee Lee, Tai Hun Kwon and Dong Sung Kim, “Nanofabrication of Nickel Stamp for Replication of Polymer Multi-Level Nanolens Arrays via Two-Step Anodization Process”, 23rd International Microprocesses and Nanotechnology Conference (MNC) 2010, November 9-12, 2010, Fukuoka, Japan, 12D-11-51.